> > > does anybody know an easy way to connect two router > interface on an M5 > > at layer 2? I would like to use this as a temporary > solution to switch > > frames between these interfaces. Is this achievable by using > > ethernet-ccc? > > Yes. You want Layer 2 switching cross-connect, using > "interface-switch": > > http://www.juniper.net/techpubs/software/junos/junos81/swconfi > g81-mpls-apps/html/ccc-tcc-config3.html#1013938 > http://www.juniper.net/techpubs/software/junos/junos81/swconfi > g81-mpls-apps/html/ccc-tcc-config11.html
That's what I want to know. Thanks Steinar. best wishes, Christian > > Steinar Haug, Nethelp consulting, [EMAIL PROTECTED] > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp