draft-ietf-pwe3-vccv-xx.txt specifies the mechanism for signaling the VCCV capability in interface sub TLV. (FEC 128/129). But for BGP signaled VPLS, there is no option in RFC 4761 for signaling the VCCV capability.
Can't we do health check for VPLS in Juniper? I assume Juniper does not support LDP based approach (RFC 4762) for VPLS. In this case, what is available as OAM mechanism for VPLS in juniper? http://www.juniper.net/solutions/literature/white_papers/200116.pdf states that "*Other specifications that Juniper Networks is implementing and seeking customer feedback on include **PWE3 for MPLS PW OAM ( draft-ietf-pwe3-vccv-02.txt) and PWE3 for OAM Inter-Networking **( draft-nadeau-pwe3-msg-msg-map-04.txt)." .* But I am not able to find any specification about signaling the VCCV capability for BGP signaled VPLS in vccv draft specified above. There is L2 Information extended community attribute in L2VPN NLRI. With this we can specify the "control word" option. Does Juniper do OAM based on this control word? If so how do I enable that? TIA, Monika _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp