Hello All, We are trying to migrate a frame relay network onto our mpls network, based on juniper M10i routers. We are using frame-relay-ccc encapsulation and l2circuit configuration. The problem is that we are unable to configure dlci values below 512. We get the following error when trying to configure units with dlci below 512:
CCC or TCC on this interface must have a DLCI >= 512 Is this a known limitation? Can this be worked around somehow? This forces us to change dlci values at customers routers, which makes the migration problematic. Maybe the choice of ccc encapsulation is wrong, we have chose it just because it is the first configuration we encountered. Any advice would be welcomed. Regards Amos _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp