Hi list, the JUNOSe 8.1 documentation at http://tinyurl.com/2aclxy section "Configuring Ethernet Interfaces" states:
"To create the links in the LAG bundles, you can add one or more Ethernet physical interfaces to it. The LACP detects Ethernet interfaces as links if they are configured on the same line module and have the same physical layer characteristics. The LACP also assigns to the LAG bundle the same MAC address of the Ethernet link with the highest port priority, which is the lowest value." Does this mean that i can use the transceiver of two ERX-GIGESFP-IOAs each to create a 2GBps Full Duplex LAG? Thanks and best regards, sven03 -- Mit freundlichen Gruessen i. A. Sven Juergensen Fachbereich Informationstechnologie KielNET GmbH Gesellschaft fuer Kommunikation Preusserstr. 1-9, 24105 Kiel Telefon : 0431 / 2219-053 Telefax : 0431 / 2219-005 E-Mail : [EMAIL PROTECTED] Internet: http://www.kielnet.de AS# 25295 Key fingerprint: 65B6 90FC 010A 39CE DCA5 336D 9C45 3B7A B02D E132 Geschaeftsfuehrer Eberhard Schmidt HRB 4499 (Amtsgericht Kiel) _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp