and how can i see traffic transit the router???
----- Original Message -----
From: Rafał Szarecki
To: M.Mihailidis
Cc: juniper-nsp@puck.nether.net
Sent: Wednesday, September 05, 2007 1:22 PM
Subject: Re: [j-nsp] monitor
This command monitor only traffic originated or terminated on local routing
engine. You do not see packet which transit through the router (received on one
interface and send via other)
2007/9/5, M.Mihailidis <[EMAIL PROTECTED]>:
hello guys i want to monitor a interface to see what source address it is
using when i try to ping a certain address
i used "monitor traffic interface ge-0/0/1 extensive"
and all i got was the rip routing updates as output.
any suggestions?
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
--
Rafał Szarecki JNCIE-M/T, JNCIP-E
+48602418971
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
