On Tue, Oct 02, 2007 at 07:46:52AM -0400, Jeff Aitken wrote:
> On Tue, Oct 02, 2007 at 12:58:38PM +0800, Mark Tinka wrote:
> > Can not configure more than one cflowd v5 collector
> > Any workaround?
>
> The common workaround to this problem is to feed your netflow data to a
> single collector that is capable of replicating the data as needed. Arbor
> does this and I'd be surprised if most of the other commercial packages
> didn't also. Alternatively, you can look at flow-tools:
>
> http://www.splintered.net/sw/flow-tools/
>
> which seems to have this functionality (although I haven't used it
> personally).
Correct, you can use flow-fanout to perform this action.
I had toyed at one point with using a multicast export, which would
be the ideal way in some cases to replicate the data. Seems it would be an
easy solution if you have multicast enabled.
- jared
--
Jared Mauch | pgp key available via finger from [EMAIL PROTECTED]
clue++; | http://puck.nether.net/~jared/ My statements are only mine.
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
