I belive Juniper M20/M40 uses following memory for SSB.
Smart Modular Technology Part Number : SM572088094D6G6 Desc : 64MB 168pin ECC memory You can check with your memory vendor. MemoryTen has a couple of them in stock. http://www.memoryten.com/c/3L-AMB/AMB.htm Hyun Hyunseog Ryu Senior Network Engineer Norlight , Inc. as a part of Q-Comm Company Applications Engineering 13935 Bishops Drive Brookfield, WI 53005 Phone. +1-262-792-7965 Fax. +1-262-792-7733 Email. [EMAIL PROTECTED] Nicolaj Kamensek <[EMAIL PROTECTED]> Sent by: [EMAIL PROTECTED] 11/01/2007 01:08 PM To "Ruslan A. Magomedov" <[EMAIL PROTECTED]> cc juniper-nsp@puck.nether.net Fax to Subject Re: [j-nsp] System board memory expansion on M7i Ruslan A. Magomedov schrieb: Hi, > As far as i know, > M20/M40 Internet Processor II SCB - 2xSLOTs DIMM DRAM ECC 168-pin 2 slots is correct but without ECC. You can upgrade a SSB-E to 128mb by installing 2 64mb modules from 2 SSB-E in just one SSB-E. However, I did not manage to find a 3rd party module working in the SSB-E yet. The original one is a 64MB single-sided SDRAM, no ECC, PC66 with Samsung chips. > M10 (not M10i) - 1xSLOT SO-DIMM SDRAM ECC 144-pin > > I do not know what memory and how many slots in M7i CFEB. Actually i > have not tried to increase the PFE memory. Have anybody tried? Only in M20 and M40. Regards, Nico -- Accelerated IT Services GmbH Schubertstrasse 10 D-67251 Freinsheim [EMAIL PROTECTED] http://www.accelerated.de/ Telefon: +49 69-25738580-3 Telefax: +49 69-25738580-4 HRB: 60665 - Amtsgericht Ludwigshafen UstID: DE253684415 Geschäftsführende Gesellschafter: Nicolaj Kamensek & Ole Krieger _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp