Hi all, I would like to implement RIPv2 MD5 authentication between an M320 running Junos 8.4 and a Cisco 877 running 12.4T IOS in a PE-CE scenario. However, I am seeing RIP authentication failure on the M320 end, whereas the 877 authenticates the RIP update just fine. I am using 'key 1' on the IOS end. As I understand, RFC2082 defines the key identifier, which IOS does implement with the "key <number>" statement in the key chain definition. I can not see where I can specify the key identifier within Junos... Does anyone know what key Junos uses with using MD5 RIP authentication? Also, whether anybody has successfully implemented RIP MD5 authentication between Junos and IOS, and with what settings. I would like to confirm whether there is interoperability between Junos and IOS regarding MD5 RIP authentication. Thanks for your help. Regards, Mario.
Email disclaimer: The information contained in or attached to this communication may contain confidential or privileged information and is intended for the addressee only. If you are not the intended recipient of this email communication, you are notified that any use, dissemination, distribution or copying of this message or data is prohibited. If you have received this email in error, please notify the sender by return email and permanently delete the document. The views expressed in this message are those of the individual sender, except where the sender specifically states them to be the views of VicTrack. VicTrack does not guarantee that the integrity of this communication has been maintained nor that this communication is free of viruses, interceptions or interference. Please consider the environment before printing this Email. _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
