hi,all
I have been tring to configure is-is as pe-ce routing protocol in L3/2547
VPN and i found something puzzling.If i add" metric-style wide" after the
"router isis" command,then the route learned from MP-BGP couldn't
redistribute into IS-IS.
For example,a map like this:
CE1-PE1-P-PE2-CE2
/
/
10.1.1.0/24
CE1-PE1 and CE2-PE2 using IS-IS protocol,if i add "metric-style wide",then
PE2 can learned 10.1.1.0/24 via MP-BGP and put it into the VRF which connect
to CE2,but CE2 couldn't learned 10.1.0/24.if i modify the style to narrow
from wide,then everything is ok.
I guess ERX could only change the MED of BGP to narrow style metric.but i'm
not sure that.
--
king
[EMAIL PROTECTED]
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
