Hello, I think that you need to configure a udp rpm server process in the remote machine. I do not think that rpm expects to receive an icmp error message in response to a udp test probe. No config is needed for icmp test probes in the server, but tcp and udp probes need something like:
services { rpm { probe-server { udp { port 50000; } } } } HTHs > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > Ihsan Junaidi Ibrahim > Sent: Saturday, January 05, 2008 4:37 AM > To: juniper-nsp@puck.nether.net > Subject: [j-nsp] RPM udp-ping probe test timing out > > Hi all, > > I've configured Juniper RPM with probe type > udp-ping-timestamp but having zero luck obtaining results. > The probes kept timing out. The target host's packet filter > has been explicitly configured to return reject message to > the probe destination port. Counter check on the term tallies > with the packet counts. > > The probing host filter has been configured to accept all > types of inbound ICMP packets. > > I've even disabled both routers firewall filters just to > eliminate the issue but still no go. No DSCP marking is > associated with the probe packets. > > However when RPM is configured with icmp-ping-timestamp probe > type, the tests are successful. > > Both routers are an M320 with Junos 8.5 r1.13. Their sp-* > interfaces are configured with an IP address and rpm client > parameter. The target host IP address refers to its loopback address. > > Here's source router RPM test configuration: > > [EMAIL PROTECTED] show > test pjyab01-mse_udp_ping { > probe-type udp-ping-timestamp; > target address 10.200.201.2; > probe-count 3; > probe-interval 10; > test-interval 60; > destination-port 50000; > data-size 512; > destination-interface sp-5/0/0.0; > } > > [EMAIL PROTECTED]> show configuration interfaces sp-5/0/0 unit 0 { > rpm client; > family inet { > address 10.200.225.138/32; > } > } > > and the test result: > > [EMAIL PROTECTED]> show services rpm probe-results owner > udp-test test pjyab01-mse_udp_ping > Owner: udp-test, Test: pjyab01-mse_udp_ping > Target address: 10.200.201.2, Probe type: udp-ping-timestamp > Destination interface name: sp-5/0/0.0 > Test size: 3 probes > Probe results: > Request timed out, Sat Jan 5 20:32:31 2008 > Results over current test: > Probes sent: 3, Probes received: 0, Loss percentage: 100 > Results over last test: > Probes sent: 3, Probes received: 0, Loss percentage: 100 > Results over all tests: > Probes sent: 27, Probes received: 0, Loss percentage: 100 > > The target host firewall filter : > > [EMAIL PROTECTED]> show configuration firewall filter Protect-RE term > permit_rpm > from { > protocol udp; > destination-port 50000; > } > then { > count count_rpm; > reject; > } > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp