Hello, We have a Juniper router J-4300 and the following situation:
0------------0----------------[] Cable Router LAN Basically we have 3 problems ... First: The WAN interface of the router connected to the cable modem is fe-0/0/1 The cable modem is configured with DHCP Server Option ... so: system { autoinstallation { interfaces { fe-0/0/1 { bootp; } } } Is it correct ? Is there any other option for DHCP Client using JUNOS ? Without the next configuration (bellow) ... the router does not install the default route: Why ??? Isn't boot ? routing-options { static { defaults { install; } route 0.0.0.0/0 { next-hop 189.7.36.1; --> STATIC DEFAULT ROUTE ??? install; active; } } } Second: Its impossible to fix a pool address for NAT option. Ex: nat { pool jweb-nat-pool { address-range low 189.7.37.57 high 189.7.37.57; --> IP changes every time !!! port automatic; } rule jweb-nat-to-wan { match-direction output; term jweb-nat-term { then { translated { source-pool jweb-nat-pool; translation-type { source dynamic; } } } } } } ... because the IP address of the WAN interface CHANGEs every time !!! How can I get the WAN interface IP [VAR] to install it in address-range in an auto mode ? And finally ... when we apply the statefull firewall rules ... the BOOTIP stop to work !!! fe-0/0/1 { unit 0 { family inet { service { input { service-set jweb-wan-sfw-service-set; } output { service-set jweb-wan-sfw-service-set; } } } } } How can I solve it ? Does anyone could help ? _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp