Try turning on some traceoptions in OSPF on the Juniper ... it'll probably tell you what the problem is ... maybe a typo'ed md5 key, or an unexpected router-id ?
cheers Matthew Crocker wrote: > I need some Juniper-Foo for my OSPF config. > > I have 3 routers connected to a GigE switch. > > Router A is a Cisco 12000 > Router B is a Juniper J6350 > Router C is a Redback SE-400 > > I have A&C talking OSPF and sharing routes just fine. > > I have A&B & C&B complaining about what the Juniper is sending out > and shutting it down. > > Router B config is > > # show protocols ospf > export export-statics; > area 0.0.0.0 { > authentication-type md5; > interface ge-0/0/0.0 { > authentication { > md5 1 key "$XXXXXXXXXXXXXXXXX"; ## SECRET-DATA > } > } > } > > Router A config is > interface GigabitEthernet4/1 > description Link to CORE-SW-A-Fe-0-1 > ip address 1.2.3.4 255.255.255.128 > no ip directed-broadcast > ip ospf authentication message-digest > ip ospf authentication-key 7 XXXXXXXXXXXXXXX > ip ospf message-digest-key 1 md5 7 XXXXXXXXXXXXX > no negotiation auto > > router ospf 1 > router-id 204.97.12.4 > log-adjacency-changes > nsf > area 0 authentication message-digest > redistribute connected subnets > redistribute static subnets > network 1.2.3.0 0.0.0.255 area 0 > > > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp