Find a friend with a full BGP feed and set up an ebgp multihop peer to them? Just make sure to filter updates out (and hopefully he/she is filtering in from you) to cover those "oops" moments.
:) HTH, Scott PS. Otherwise, there's a lot of Cut/Paste involved and Ctrl-H for Search/Replace. Been there, done that! -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of wang dong bei Sent: Wednesday, February 20, 2008 12:03 PM To: juniper-nsp Subject: [j-nsp] How to load a lot of prefixes Hi talented minds, I want to do some testing with BGP and I need to inject a lots of routes, preferably the entire Internet routing table, into some of the routers of an isolated lab. My initial approach is to capture the "show route bgp" output from one of my routers and massage the data into the "set routing-options static prefix....." and load everything into my testing routers. However, the script is more difficult to write, the result is full of errors, and when I load the config, it somehow hang my terminal sessions. So are there anyways to quickly populate the routing table of my testing routers by administrative configuration means? thanks for your help. regards, dong bei _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp