I think Juniper has no equivalent command for "shut down" like in Cisco but I do know that if disable the port the router will not be able to send traffic to that interface and will ignore all command related to that interface although, the remote peer will still see the port up.
On Wed, Mar 5, 2008 at 12:55 AM, Samuel <[EMAIL PROTECTED]> wrote: > > > The following commands should do the trick on M7i, > > regardless of the fact that interface is fixed. > > Be careful, though, your second port fe-1/3/1 will be shut-down as well. > > request chassis pic offline fpc-slot 1 pic-slot 3 > Thanks Alexander. I had tried, but too quickly. It works fine even on > fixed interfaces. > > > Timo, if I use: "set interface fa-x/y/z disable", I get it: > > [EMAIL PROTECTED]> show interfaces terse > Interface Admin Link Proto Local > Remote > fe-1/3/0 down up > > Hyun, if I use: "deactivate interface fa-0/0/0", I get it: > > [EMAIL PROTECTED]> show interfaces terse > Interface Admin Link Proto Local > Remote > fe-1/3/0 up up > > And I would like to get: > fe-1/3/0 down down > > > > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
