People, We are using some Juniper J-Series 4300 routers with Dual Port Sync Serial PIM:
[EMAIL PROTECTED] run show chassis pic fpc-slot 1 pic-slot 0 FPC slot 1, PIC slot 0 information: Type 2x Serial State Online PIC version 3.8 Uptime 4 hours, 1 minute, 36 seconds We are connected to a Frame-Relay network with 256 Kbps of bandwidth. We would like to configure fragmentation and packet interleaving for this interface without success. The J-Series routers supports only ls-0/0/0 interfaces ... and not the lsq-0/0/0 interfaces. With that ... we cannot use fragmentation-maps over the traffic: For AS PIC link services IQ interfaces (lsq) only, you can configure fragmentation properties on a particular forwarding class. To do this, include the fragmentation-maps statement at the [edit class-of-service] hierarchy level ... When we try to configure ... [EMAIL PROTECTED] show unit 0 { fragment-threshold 320; We cannot associate ls-0/0/0 bundle with the serial interface, because it does not have the support for the MLFR. Anyone has some tip or conclusion about how to use it ? It is possible to configure RTP COMPRESSION for a Frame-Relay link ? Thanks a lot, Giuliano _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp