> -----Original Message----- > From: [EMAIL PROTECTED] [mailto:juniper-nsp- > [EMAIL PROTECTED] On Behalf Of Jonathan Brashear > Sent: Wednesday, April 16, 2008 8:57 AM > To: juniper-nsp@puck.nether.net > Subject: Re: [j-nsp] Switch mesh / VRRP question > > In my experience, Juniper doesn't allow the same subnet to be > assigned > to multiple _physical_ interfaces. > > Network Engineer > > 214-981-1954 (office) > > 214-642-4075 (cell) > > [EMAIL PROTECTED] > http://www.speakeasy.net
This is correct. The only possible ways I know of that this would work would be to configure logical-routers, if your platform supports it, or configure two separate VRRP subnets, aggregate your switch1 and switch2 interfaces together, and run VRRP on two subnets. -evt _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp