Jonathan Brashear schrieb: Hi all,
a question regarding this: how would this have to look like if I didn't want to "waste" 3 IPs per subnet? Is it possible just to use 2 IPs for a vrrp setup if I do not need load-balancing? > #router1 > > ge-0/0/0 { > description "Uplink to switch1"; > link-mode full-duplex; > unit 0 { > family inet { > no-redirects; > address 10.0.0.2/23 { > vrrp-group 1 { > virtual-address 10.0.0.1; > priority 20; > preempt; > } > } > } > } > } > > #router2 > > ge-0/0/0 { > description "Uplink to switch1"; > link-mode full-duplex; > unit 0 { > family inet { > no-redirects; > address 10.0.0.4/23 { > vrrp-group 1 { > virtual-address 10.0.0.1; > priority 30; > preempt; > } > } > } > } > } Thanks! -- Accelerated IT Services GmbH Schubertstrasse 10 D-67251 Freinsheim [EMAIL PROTECTED] http://www.accelerated.de/ Telefon: +49 69-25738580-3 Telefax: +49 69-25738580-4 HRB: 60665 - Amtsgericht Ludwigshafen UstID: DE253684415 Geschäftsführende Gesellschafter: Nicolaj Kamensek & Ole Krieger _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp