Sorry I should have explained myself better!!
The problem is that nothing is exported to my netflow server. If you look at the Output command it has inactive next to it " inactive: output { " I assume I have missed something. -----Original Message----- From: Erdem Sener [mailto:[EMAIL PROTECTED] Sent: Sunday, May 04, 2008 12:13 PM To: Travers Stark Subject: Re: [j-nsp] Traffic sampling Hey Travers, What is your problem exactly? Cheers, Erdem On Sun, May 4, 2008 at 2:21 AM, Travers Stark <[EMAIL PROTECTED]> wrote: > Guys, > > Wonder if anyone can help with j flow traffic sampling > > I have setup the following. Notice the inactive: output { > > Nothing is being sent. I have installed the license for J-flow > > I have probably missed something simple. > > Any help would be appreciated > > forwarding-options { > sampling { > input { > family inet { > rate 100; > run-length 9; > max-packets-per-second 9000; > } > } > inactive: output { > cflowd 119.63.216.75 { > port 9996; > source-address 119.63.216.3; > version 5; > no-local-dump; > } > > ge-0/0/0 { > unit 0 { > description "Link to Backbone Network"; > family inet { > sampling { > input; > output; > > > Travers Stark > > > > > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp