I guess you have two static routes. If this is the case, as you know first of all the 2 routes should have the same prefix length (10.0.0.0/24, 0.0.0.0/0 etc) and Preference. You need to make these preferences equal either by configuring policy to set the preference/metric value same.
To enable per-flow load balancing, you must set the load-balance per-packet action in routing policy configuration. policy-statement please-load-balance { then { load-balance per-packet; } } For further you can visit: http://www.juniper.net/techpubs/software/junos/junos70/swconfig70-policy/htm l/policy-actions-config11.html Regards, Masood Ahmad Shah BLOG: http://www.weblogs.com.pk/jahil -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mike Sent: Wednesday, July 23, 2008 2:10 PM To: Juniper-Nsp Subject: [j-nsp] Load balance with 2 adsl pics Hello I have a j router with 2 adsl pics is possible to load balance traffic between the 2 cards? And if so via Multilink? Or there is some other way to do so? _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp