I would also like to do this but does anybody know if the per-flow load balancing will correctly distribute multiple GRE sessions between the same pair of IP addresses fairly across the two paths?
AFAIK it will NOT do this and so per-flow load balancing will not always ... balance :) Thanks, Leigh Porter UK Broadband Masood Ahmad Shah wrote: > I guess you have two static routes. If this is the case, as you know first > of all the 2 routes should have the same prefix length (10.0.0.0/24, > 0.0.0.0/0 etc) and Preference. You need to make these preferences equal > either by configuring policy to set the preference/metric value same. > > To enable per-flow load balancing, you must set the load-balance per-packet > action in routing policy configuration. > > policy-statement please-load-balance { > then { > load-balance per-packet; > } > } > > > For further you can visit: > > http://www.juniper.net/techpubs/software/junos/junos70/swconfig70-policy/htm > l/policy-actions-config11.html > > Regards, > Masood Ahmad Shah > BLOG: http://www.weblogs.com.pk/jahil > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Mike > Sent: Wednesday, July 23, 2008 2:10 PM > To: Juniper-Nsp > Subject: [j-nsp] Load balance with 2 adsl pics > > Hello > > I have a j router with 2 adsl pics is possible to load balance traffic > between the 2 cards? And if so via Multilink? Or there is some other way to > do so? > > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp