No. And it's not Juniper, It is OSPF which does not support unequal cost load balancing.
EIGRP supports this behavior by variance factor. If EIGRP is open atandard (not Cisco proprietry) then Juniper will also support the same feature for EIGRP. However you can use some tricks to justify your scenario. Farhan On Thu, Nov 20, 2008 at 12:44 PM, Iftikhar Ahmed <[EMAIL PROTECTED]>wrote: > Hi, > > > Does Juniper support Unequal-Cost Load Balancing for OSPF, like the way > cisco do for EIGRP with commands like variance & maximum-paths etc stuff? > > > > > Regards > Iftikhar Ahmed > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
