Power down the router and insert the flash card. After you reboot just issue the command:
request system snapshot partition -Dan On Tue, Mar 3, 2009 at 9:57 AM, Matthias Gelbhardt <matth...@commy.de>wrote: > Hi! > > I would like to add a new 1 GB CF card in a M7i. I assume, there is none in > that device at the moment: > > Filesystem Size Used Avail Capacity Mounted on > /dev/ad1s1a 217M 98M 102M 49% / > devfs 1.0K 1.0K 0B 100% /dev > devfs 1.0K 1.0K 0B 100% /dev/ > /dev/md0 23M 23M 0B 100% > /packages/mnt/jbase > /dev/md1 80M 80M 0B 100% > /packages/mnt/jkernel-8.5R3.4 > /dev/md2 8.8M 8.8M 0B 100% > /packages/mnt/jpfe-M7i-8.5R3.4 > /dev/md3 3.5M 3.5M 0B 100% > /packages/mnt/jdocs-8.5R3.4 > /dev/md4 28M 28M 0B 100% > /packages/mnt/jroute-8.5R3.4 > /dev/md5 8.8M 8.8M 0B 100% > /packages/mnt/jcrypto-8.5R3.4 > /dev/md6 37M 37M 0B 100% > /packages/mnt/jpfe-common-8.5R3.4 > /dev/md7 504M 8.0K 463M 0% /tmp > /dev/md8 504M 470K 463M 0% /mfs > /dev/ad1s1e 24M 20K 22M 0% /config > procfs 4.0K 4.0K 0B 100% /proc > /dev/ad1s1f 18G 542M 16G 3% /var > > So I need one to update to 9.3R2. > > Do I have to prepare the CF before injecting it into the router? Does it > have to be formatted? > > Regards, > > Matthias > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp