Never mind, Stacy has the right answer I beleive:
--- JUNOS 9.1S1.1 built 2009-04-17 17:50:33 UTC % cli regr...@keller> show route table mpls.0 mpls.0: 11 destinations, 11 routes (11 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both 0 *[MPLS/0] 02:29:27, metric 1 Receive 1 *[MPLS/0] 02:29:27, metric 1 Receive 2 *[MPLS/0] 02:29:27, metric 1 Receive 299776 *[L2CKT/7] 02:28:10 > via ge-0/3/2.0, Pop Offset: 4 299792 *[LDP/9] 02:28:23, metric 1 > to 10.210.23.1 via ge-0/0/7.0, Pop 299792(S=0) *[LDP/9] 02:28:23, metric 1 > to 10.210.23.1 via ge-0/0/7.0, Pop 299808 *[RSVP/7] 02:27:31, metric 1 > to 10.210.23.1 via ge-0/0/7.0, label-switched-path Bypass->10.210.12.2 299808(S=0) *[RSVP/7] 02:27:31, metric 1 > to 10.210.23.1 via ge-0/0/7.0, label-switched-path Bypass->10.210.12.2 299824 *[RSVP/7] 02:27:31, metric 1 > to 10.210.22.1 via ge-0/0/6.0, label-switched-path Bypass->10.210.12.1 299824(S=0) *[RSVP/7] 02:27:31, metric 1 > to 10.210.22.1 via ge-0/0/6.0, label-switched-path Bypass->10.210.12.1 ge-0/3/2.0 *[L2CKT/7] 02:28:10, metric2 1 > to 10.210.23.1 via ge-0/0/7.0, Push 299856 Offset: -4 regr...@keller> show route table mpls.0 protocol mpls mpls.0: 11 destinations, 11 routes (11 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both 0 *[MPLS/0] 02:29:30, metric 1 Receive 1 *[MPLS/0] 02:29:30, metric 1 Receive 2 *[MPLS/0] 02:29:30, metric 1 Receiv -----Original Message----- From: juniper-nsp-boun...@puck.nether.net [mailto:juniper-nsp-boun...@puck.nether.net] On Behalf Of Harry Reynolds Sent: Tuesday, April 28, 2009 1:04 PM To: Andrew Jimmy; juniper-nsp@puck.nether.net Subject: Re: [j-nsp] display mpls table Because those active routes are not in the mpls table. That is a summary banner for the sum of all routing tables. Do a show route to see all routes in all tables. The "missing" active routes will be found spread over the remaining non-mpls.0 tables. HTHs -----Original Message----- From: juniper-nsp-boun...@puck.nether.net [mailto:juniper-nsp-boun...@puck.nether.net] On Behalf Of Andrew Jimmy Sent: Tuesday, April 28, 2009 12:49 PM To: juniper-nsp@puck.nether.net Subject: [j-nsp] display mpls table When you run the following command, why you can't see the 679 active routes. junos> show route protocol mpls table mpls.0 mpls.0: 679 destinations, 679 routes (679 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both 0 *[MPLS/0] 4w5d 13:23:40, metric 1 Receive 1 *[MPLS/0] 4w5d 13:23:40, metric 1 Receive 2 *[MPLS/0] 4w5d 13:23:40, metric 1 Receive {master} junos> _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp