On Thu, Jul 30, 2009 at 01:10:11PM -0700, Judah Scott wrote: > Anyone have a config example of Fast Reroute Node Protection? The mpls > config guide is unclear which interface (the primary path interface or the > bypass path interface) you must add "link-protection" and "bypass" blocks > to. My bypass is not being used. > > I've tried but can only get a dynamic link-protection bypass even though > upstream node is requesting node protection. Are dynamic node-protection > bypasses supported in JUNOS 9.5?
>From >http://www.juniper.net/techpubs/en_US/junos9.5/information-products/topic-collections/config-guide-mpls-applications/mpls-configuring-node-protection-or-link-protection-for-lsps.html#id-51960 [edit protocols mpls label-switched-path lsp-name] node-link-protection; This works fine, (except for P2MP LSPs). You also need to make sure that all links in the primary LSP has link-protection on the interface. And of course, there must be an alternate way to set up the bypass. You don't need to configure the bypass LSP. It is set up automatically. The bypass command seems to allow you to set constraints on your bypass LSP, put I have never used this, so I can't help you with this one. Kari _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp