None that I'm aware of, can you shoot a show hard and a show ver from that chassis with the card in? We have GE cards in slot 0 but I don't recall any card type limitation.
Cheers, Andy Vance Sr. Network Engineer Speakeasy Direct > 206.971.5144 * Fax > 206.728.1500 Email > ava...@hq.speakeasy.net * Web > www.speakeasy.net Voice * Data * Managed Services -----Original Message----- From: juniper-nsp-boun...@puck.nether.net [mailto:juniper-nsp-boun...@puck.nether.net] On Behalf Of Scott Weeks Sent: Tuesday, September 01, 2009 1:01 PM To: juniper-nsp@puck.nether.net Subject: [j-nsp] Slot zero on the ERX chassis Is there an issue where the ERX will not accept a DS3-4P I/O and OC3/OC12/DS3-ATM card set in slot zero? I am having no luck with search engines and our vendor's support folks. There is no problem when I put them in other slots. scott _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp