Do you have redundant slot comnibation for slot 0,1&2..if so, then you can't mis-match different card...
Cheers On Tue, Sep 1, 2009 at 10:27 PM, Scott Weeks <sur...@mauigateway.com> wrote: > > > -----Original Message----- > Is there an issue where the ERX will not accept a DS3-4P I/O and > OC3/OC12/DS3-ATM card set in slot zero? I am having no luck with search > engines and our vendor's support folks. There is no problem when I put them > in other slots. > ---------------------------------- > > > --- ava...@hq.speakeasy.net wrote:-------- > From: Andy Vance <ava...@hq.speakeasy.net> > > None that I'm aware of, can you shoot a show hard and a show ver from that > chassis with the card in? We have GE cards in slot 0 but I don't recall any > card type limitation. > ----------------------------------------- > > > > The card is not in there now. I did the normal slot disable, erase and > accept stuff and all I see is hardware error after it tries to boot, but it > does not do this on the other slots. We have more than one ERX, I guess > I'll try another. I just wanted to ask the group before I got a tech out > there at 2am again... > > scott > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ====================== > ==================== > ===================== > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp