> Hello all, > I'm attempting to find documentation on this, but have been unable to. > Is it possible to clear all the arp entries from a layer 3 logical > interface on an M/MX series router?
This is an MX960: rsma...@xcr1.lnd> clear arp ? Possible completions: <[Enter]> Execute this command hostname Name of host logical-system Name of logical system vpn Name of VPN routing table | Pipe through a command {master} Would not 'clear arp | match ge-x/y/z' do the trick? Robert Robert Smales Technical Engineer Cable&Wireless Worldwide www.cw.com This e-mail has been scanned for viruses by the Cable & Wireless e-mail security system - powered by MessageLabs. For more information on a proactive managed e-mail security service, visit http://www.cw.com/uk/emailprotection/ The information contained in this e-mail is confidential and may also be subject to legal privilege. It is intended only for the recipient(s) named above. If you are not named above as a recipient, you must not read, copy, disclose, forward or otherwise use the information contained in this email. If you have received this e-mail in error, please notify the sender (whose contact details are above) immediately by reply e-mail and delete the message and any attachments without retaining any copies. Cable and Wireless plc Registered in England and Wales.Company Number 238525 Registered office: 3rd Floor, 26 Red Lion Square, London WC1R 4HQ _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp