> From: Derick Winkworth [mailto:dwinkwo...@att.net] > Sent: Sunday, March 07, 2010 1:26 AM > To: Eric Van Tol; Juniper-Nsp > Subject: Re: [j-nsp] Strange IS-IS Problem > > If its JUNOS, then just configure the MTU normally in the interface > config on the switch.
It does not run JUNOS and there is no config option for MTU that I can find. I don't believe that it's configurable, but it "just works". Without configuring anything on the EX2500, I was able to pass 2000-byte sized IP packets between the Junipers. -evt _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp