Hello, I am currently looking into an issue where we are getting temperature alerts on a variety of different JunOS devices within one of our facilities. Unfortunately when I go to track down the changes all the switches are running at under 40c which is within the thresholds yet we still get alerts.
jstew...@junos Switch> show chassis temperature-thresholds Fan speed Yellow alarm Red alarm Item Normal High Normal Bad fan Normal Bad fan FPC 0 CPU 60 70 80 70 95 85 FPC 0 EX-PFE1 60 70 80 70 95 85 FPC 0 EX-PFE2 60 70 80 70 95 85 FPC 0 EX-PFE3 60 70 80 70 95 85 FPC 0 GEPHY Front Left 60 70 80 70 95 85 FPC 0 GEPHY Front Middle 60 70 80 70 95 85 FPC 0 GEPHY Front Right 60 70 80 70 95 85 FPC 0 Uplink Conn 60 70 80 70 95 85 {master:0} jstew...@junos Switch> show chassis environment Class Item Status Measurement Power FPC 0 Power Supply 0 OK FPC 0 Power Supply 1 OK Temp FPC 0 CPU OK 38 degrees C / 100 degrees F FPC 0 EX-PFE1 OK 39 degrees C / 102 degrees F FPC 0 EX-PFE2 OK 50 degrees C / 122 degrees F FPC 0 EX-PFE3 OK 45 degrees C / 113 degrees F FPC 0 GEPHY Front Left OK 20 degrees C / 68 degrees F FPC 0 GEPHY Front Middle OK 27 degrees C / 80 degrees F FPC 0 GEPHY Front Right OK 29 degrees C / 84 degrees F FPC 0 Uplink Conn OK 28 degrees C / 82 degrees F Fans FPC 0 Fan 1 OK Spinning at normal speed FPC 0 Fan 2 OK Spinning at normal speed FPC 0 Fan 3 OK Spinning at normal speed {master:0} jstew...@junos Switch> show chassis alarms No alarms currently active I am interested to know if anyone has anything similar? Also is it possible to set the thresholds? Regards, Jimmy Stewpot _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp