What is your config ?
Are you sure you are setting it right, i.e. check the rib
>set routing-options rib inet6.0 static route 49::/64 discard
>show route table inet6
inet6.0: 1 destinations, 1 routes (1 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
49::/64 *[Static/5] 00:00:07
Discard
[edit]
On 3/31/10 9:20 AM, Ramesh Karki wrote:
Hello all,
Can someone help me why my ipv6 routes is not activating on intet6.0 table
?
Scenario :
C720x -----L2-Sw----M10i
Static route from Cisco to M10i Lo0 ip is okay. but static route from M10i
to 720x Lo0 is not showing on routing table and it is not working. There is
no problem between p2p connection.
M10i is running with JunOS 9.2.
thank you
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
