Hi, yes, I can ping my neighbor or next-hop ip adddress, and also there is no any hidden routes on table inet6.0.
> show route table inet6.0 inet6.0: 12 destinations, 14 routes (12 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both abcd:3800::1/128 *[Direct/0] 1d 04:55:09 > via lo0.0 abcd:3800:1:1::/64 *[Direct/0] 1d 04:41:21 > via ge-0/0/0.0 abcd:3800:1:1::1/128 *[Local/0] 1d 04:41:21 Local via ge-0/0/0.0 abcd:3800:2:1::/126*[Direct/0] 13:48:59 > via fe-0/1/0.0 abcd:3800:2:1::1/128 *[Local/0] 13:48:59 Local via fe-0/1/0.0 abcd:3800:4::/48 *[Direct/0] 1d 04:47:20 > via fe-0/3/1.0 abcd:3800:4::1/128 *[Local/0] 1d 04:47:20 Local via fe-0/3/1.0 fe80::/64 *[Direct/0] 1d 04:47:20 > via fe-0/3/1.0 [Direct/0] 1d 04:41:21 > via ge-0/0/0.0 [Direct/0] 14:05:12 > via fe-0/1/0.0 fe80::217:cbff:fe77:0/128 *[Local/0] 1d 04:41:21 Local via ge-0/0/0.0 fe80::217:cbff:fe77:1f/128 *[Local/0] 14:05:12 Local via fe-0/1/0.0 fe80::217:cbff:fe77:5e/128 *[Local/0] 1d 04:47:20 Local via fe-0/3/1.0 fe80::2a0:a5ff:fe62:57c7/128 *[Direct/0] 1d 04:55:09 > via lo0.0 I have tried run ospf3 but no luck, the command > show ospf3 interface ge-0/0/0.0 says “OSPF instance is not running” On Wed, Mar 31, 2010 at 8:38 PM, Mark Tinka <mti...@globaltransit.net>wrote: > On Wednesday 31 March 2010 04:06:55 pm Ramesh Karki wrote: > > > Hi, > > > > here is my config : > > Can we take a look at your v6 routing table (I'm guessing > it's small enough). > > Cheers, > > Mark. > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp