On Thu, 1 Apr 2010, Ramesh Karki wrote:
Similar ospf config between cisco to cisco is okay there is not any issue. But between cisco to M10i is not working. Here, I have listed my JunOS ospf config : run show configuration protocols ospf3 preference 10; area 0.0.0.10 { interface lo0.0 { passive; } interface ge-0/0/0.0 { metric 10;am I missing anything ?? My curiosity : when I execute the command > run show ospf3 interface ge-0/0/0.0 it says - “OSPF instance is not running” ??
Is your ospf config similar for both IPv4 and IPv6? Does 'show ospf interface' give you the same thing?
Antonio Querubin 808-545-5282 x3003 e-mail/xmpp: t...@lava.net
_______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp