Hi Nilesh, Herewith, I have attached the output file. please go through the file.
thank you, Ramesh On Mon, Apr 5, 2010 at 12:23 PM, Nilesh Khambal <nkham...@juniper.net>wrote: > Ramesh, > > Do you see cisco neighbor in "show ipv6 neighbors"? > > Thanks, > Nilesh > > On 4/4/10 11:32 PM, "Ramesh Karki" <rameshka...@gmail.com> wrote: > > > Hi Antonio, > > > > yes, interface ge-0/0/0 is only configure for ospf3 and interface > fe-0/1/0 > > is configued for dual-stack. > > > > Here, I have listed the required configuation as you have asked. > > > > scenario > > Cisco-rtr ------------------ ge-0/0/0 (M10i) fe-0/1/0 ----------------- > > Cisco-rtr > > ospf3 dual-stack > > ospf2 and ospf3 > > > > M10i config > > > > show configuration protocols ospf > > preference 110; > > area 0.0.0.10 { > > interface lo0.0 { > > passive; > > } > > interface fe-0/1/0.0; > > interface fxp0.0 { > > disable; > > } > > interface fe-0/1/1.0 { > > passive; > > } > > interface fe-0/1/2.0 { > > passive; > > } > > interface fe-0/3/0.0 { > > passive; > > } > > } > > > > > > show configuration protocols ospf3 > > preference 110; > > area 0.0.0.10 { > > interface ge-0/0/0.0; > > interface lo0.0 { > > passive; > > } > > interface fe-0/3/1.0 { > > passive; > > } > > interface fe-0/1/0.0; > > > > > > > > show ospf interface > > Interface State Area DR ID BDR ID > > Nbrs > > fe-0/1/0.0 BDR 0.0.0.10 x.x.192.4 x.x.192.1 > > 1 > > fe-0/1/1.0 DRother 0.0.0.10 0.0.0.0 0.0.0.0 > > 0 > > fe-0/1/2.0 DRother 0.0.0.10 0.0.0.0 0.0.0.0 > > 0 > > fe-0/3/0.0 DRother 0.0.0.10 0.0.0.0 0.0.0.0 > > 0 > > lo0.0 DRother 0.0.0.10 0.0.0.0 0.0.0.0 > > 0 > > > > > > > > > > show ospf3 interface > > OSPF instance is not running > > > > > > The neighbor cisco devices, one connected to m10i fe-0/1/0 and another > cisco > > device connected to M10i ge-0/0/0 > > > > cisco config output connected to M10i fe-0/1/0 > > > > #sh run | be ^ipv6 router ospf > > ipv6 router ospf 1 > > router-id x.x.192.4 > > log-adjacency-changes > > passive-interface default > > no passive-interface FastEthernet0/0 > > > > > > #sh run int fa0/0 > > Building configuration... > > > > Current configuration : 284 bytes > > ! > > interface FastEthernet0/0 > > description *** *** > > ip address x.x.193.4 255.255.255.240 > > no keepalive > > duplex full > > ipv6 address abcd:3800:2:1::2/126 > > ipv6 enable > > ipv6 ospf 1 area 10 > > no cdp enable > > no clns route-cache > > end > > > > #sh ipv6 ospf int > > FastEthernet0/0 is up, line protocol is up > > Link Local Address FE80::20C:31FF:FE95:A400, Interface ID 3 > > Area 10, Process ID 1, Instance ID 0, Router ID x.x.192.4 > > Network Type BROADCAST, Cost: 1 > > Transmit Delay is 1 sec, State DR, Priority 1 > > Designated Router (ID) x.x.192.4, local address > FE80::20C:31FF:FE95:A400 > > No backup designated router on this network > > Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5 > > Hello due in 00:00:00 > > Index 1/1/2, flood queue length 0 > > Next 0x0(0)/0x0(0)/0x0(0) > > Last flood scan length is 0, maximum is 0 > > Last flood scan time is 0 msec, maximum is 0 msec > > Neighbor Count is 0, Adjacent neighbor count is 0 > > Suppress hello for 0 neighbor(s) > > Loopback6 is up, line protocol is up > > Link Local Address FE80::20C:31FF:FE95:A400, Interface ID 15 > > Area 10, Process ID 1, Instance ID 0, Router ID x.x.192.4 > > Network Type LOOPBACK, Cost: 1 > > Loopback interface is treated as a stub Host > > > > > > cisco config output connected to M10i ge-0/0/0 > > > > #sh run int fa0/0 > > Building configuration... > > > > Current configuration : 258 bytes > > ! > > interface FastEthernet0/0 > > description *** *** > > ip address x.x.193.72 255.255.255.192 > > ip route-cache flow > > duplex auto > > speed auto > > ipv6 address abcd:3800:1:1::2/64 > > ipv6 enable > > ipv6 ospf 1 area 10 > > no cdp enable > > end > > > > > > #sh run | be ^ipv6 router ospf > > ipv6 router ospf 1 > > router-id x.x.192.2 > > log-adjacency-changes > > passive-interface default > > no passive-interface FastEthernet0/0 > > > > > > > > #sh ipv6 int fa0/0 > > FastEthernet0/0 is up, line protocol is up > > IPv6 is enabled, link-local address is FE80::218:73FF:FE46:1232 > > Description: *** *** > > Global unicast address(es): > > abcd:3800:1:1::2, subnet is abcd:3800:1:1::/64 > > Joined group address(es): > > FF02::1 > > FF02::2 > > FF02::5 > > FF02::6 > > FF02::1:FF00:2 > > FF02::1:FF46:1232 > > MTU is 1500 bytes > > ICMP error messages limited to one every 100 milliseconds > > ICMP redirects are enabled > > ND DAD is enabled, number of DAD attempts: 1 > > ND reachable time is 30000 milliseconds > > ND advertised reachable time is 0 milliseconds > > ND advertised retransmit interval is 0 milliseconds > > ND router advertisements are sent every 200 seconds > > ND router advertisements live for 1800 seconds > > Hosts use stateless autoconfig for addresses. > > > > > > Have a query that is, why even the static route didn't worked on the box? > > > > Thank you, > > Ramesh > > > > > > On Sun, Apr 4, 2010 at 6:56 PM, Antonio Querubin <t...@lava.net> wrote: > > > >> On Sun, 4 Apr 2010, Ramesh Karki wrote: > >> > >> As I have already mentioned, the same interface fe-0/1/0 has been > >>> configured > >>> to run both ospf and ospf3 and there is no any issue on ospf v4 from > the > >>> beginning. > >>> > >>> show ospf interface fe-0/1/0.0 > >>>> > >>> Interface State Area DR ID BDR ID > >>> Nbrs > >>> fe-0/1/0.0 BDR 0.0.0.10 x.x.192.4 x.x.192.1 > >>> 1 > >>> > >>> but the same interface configured for ospf3 outcome is unexpected. > >>> > >>> show ospf3 interface fe-0/1/0.0 > >>>> > >>> OSPF instance is not running > >>> > >> > >> Reviewing what you've posted so far I only see a partial ospf3 config > for > >> ge-0/0/0.0 > >> > >> Could you please post the complete output of: > >> > >> show configuration protocols ospf > >> show configuration protocols ospf3 > >> show ospf interface > >> show ospf3 interface > >> > >> Then for your dual-stack interfaces which should be running ospf and > ospf3 > >> do: > >> > >> show configuration interfaces > >> > >> On your ciscos which have a working ospf3 config do > >> > >> show running-config | begin ipv6 router ospf > >> show ipv6 ospf interface > >> > >> show running-config interface <each dual-stack interface that faces a > >> juniper> > >> > >> > >> Antonio Querubin > >> 808-545-5282 x3003 > >> e-mail/xmpp: t...@lava.net > >> > > _______________________________________________ > > juniper-nsp mailing list juniper-nsp@puck.nether.net > > https://puck.nether.net/mailman/listinfo/juniper-nsp > >
1, turn on ospf3 traceoptions with flag all details and Deactivate and activate ospf3 configuration and capture output of "show log log-ospf3". -show log log-ospf3 error: could not resolve file: log-ospf3 -run show configuration protocols ospf3 traceoptions { file log-ospf3 size 5m; flag all; } preference 110; area 0.0.0.10 { interface ge-0/0/0.0; interface lo0.0 { passive; } interface fe-0/3/1.0 { passive; } interface fe-0/1/0.0; } 2, -show ospf3 interface extensive -show ospf3 neighbor details "OSPF instance is not running" 3, -show interfaces fe-0/1/0 extensive Physical interface: fe-0/1/0, Enabled, Physical link is Up Interface index: 129, SNMP ifIndex: 123, Generation: 152 Description: Connected to Beetle for iBGP peering Link-level type: Ethernet, MTU: 1514, Link-mode: Full-duplex, Speed: 100mbps, MAC-REWRITE Error: None, Loopback: Disabled, Source filtering: Disabled, Flow control: Enabled Device flags : Present Running Interface flags: SNMP-Traps Internal: 0x4000 CoS queues : 4 supported, 4 maximum usable queues Hold-times : Up 0 ms, Down 0 ms Current address: 00:17:cb:77:00:1f, Hardware address: 00:17:cb:77:00:1f Last flapped : 2010-03-15 11:23:26 NPT (3w0d 01:22 ago) Statistics last cleared: Never Traffic statistics: Input bytes : 15178288924 37296 bps Output bytes : 8070399467 445688 bps Input packets: 36784001 47 pps Output packets: 22469942 58 pps IPv6 transit statistics: Input bytes : 0 Output bytes : 0 Input packets: 0 Output packets: 0 Input errors: Errors: 35391, Drops: 0, Framing errors: 0, Runts: 0, Policed discards: 181893, L3 incompletes: 35391, L2 channel errors: 0, L2 mismatch timeouts: 0, FIFO errors: 0, Resource errors: 0 Output errors: Carrier transitions: 1, Errors: 0, Drops: 0, Collisions: 0, Aged packets: 0, FIFO errors: 0, HS link CRC errors: 0, MTU errors: 0, Resource errors: 0 Egress queues: 4 supported, 4 in use Queue counters: Queued packets Transmitted packets Dropped packets 0 best-effort 22217431 22217431 0 1 expedited-fo 0 0 0 2 assured-forw 0 0 0 3 network-cont 252510 252510 0 Active alarms : None Active defects : None MAC statistics: Receive Transmit Total octets 15870756710 8478382315 Total packets 37001282 22469939 Unicast packets 36778074 21930733 Broadcast packets 0 328787 Multicast packets 223208 210418 CRC/Align errors 0 0 FIFO errors 0 0 MAC control frames 0 0 MAC pause frames 0 0 Oversized frames 0 Jabber frames 0 Fragment frames 0 VLAN tagged frames 0 Code violations 0 Filter statistics: Input packet count 37001283 Input packet rejects 0 Input DA rejects 217283 Input SA rejects 0 Output packet count 22469939 Output packet pad count 0 Output packet error count 0 CAM destination filters: 7, CAM source filters: 0 Autonegotiation information: Negotiation status: Complete Link partner: Link mode: Full-duplex, Flow control: None, Remote fault: OK Packet Forwarding Engine configuration: Destination slot: 0 Direction : Output CoS transmit queue Bandwidth Buffer Priority Limit % bps % usec 0 best-effort 95 95000000 95 0 low none 3 network-control 5 5000000 5 0 low none Logical interface fe-0/1/0.0 (Index 69) (SNMP ifIndex 127) (Generation 157) Flags: SNMP-Traps Encapsulation: ENET2 Traffic statistics: Input bytes : 15178288924 Output bytes : 8070399467 Input packets: 36784001 Output packets: 22469942 IPv6 transit statistics: Input bytes : 0 Output bytes : 0 Input packets: 0 Output packets: 0 Local statistics: Input bytes : 21964426 Output bytes : 39656497 Input packets: 323818 Output packets: 671972 Transit statistics: Input bytes : 15156324498 37296 bps Output bytes : 8030742970 445688 bps Input packets: 36460183 47 pps Output packets: 21797970 58 pps IPv6 transit statistics: Input bytes : 0 Output bytes : 0 Input packets: 0 Output packets: 0 Protocol inet, MTU: 1500, Generation: 166, Route table: 0 Flags: None Addresses, Flags: Is-Preferred Is-Primary Destination: x.x.193.0/28, Local: x.x.193.1, Broadcast: x.x.193.15, Generation: 197 Protocol inet6, MTU: 1500, Generation: 179, Route table: 0 Flags: None Addresses, Flags: Is-Preferred Is-Primary Destination: abcd:3800:2:1::/126, Local: abcd:3800:2:1::1, Broadcast: Unspecified, Generation: 231 Addresses, Flags: Is-Preferred Destination: fe80::/64, Local: fe80::217:cbff:fe77:1f, Broadcast: Unspecified, Generation: 229 4, -show ipv6 neighbors IPv6 Address Linklayer Address State Exp Rtr Interface abcd:3800:1:1::2 00:18:73:46:12:32 stale 578 yes ge-0/0/0.0 abcd:3800:2:1::2 00:0c:31:95:a4:00 stale 925 yes fe-0/1/0.0 fe80::202:17ff:fed8:4c00 00:02:17:d8:4c:00 stale 442 yes ge-0/0/0.0 fe80::20c:31ff:fe95:a400 00:0c:31:95:a4:00 stale 57 yes fe-0/1/0.0 fe80::218:73ff:fe46:1232 00:18:73:46:12:32 stale 746 yes ge-0/0/0.0
_______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp