Ahh now that makes sense. Yes the other card is a DPC card. In order to correct this, I'll have to migrate our connections the MPC card. Do you know if a reload is required or can I just pull the DPCs and online the MPC?
Thanks, Michael On Tue, May 4, 2010 at 2:46 AM, Richard A Steenbergen <r...@e-gerbil.net> wrote: > On Tue, May 04, 2010 at 02:25:16AM -0400, Michael Phung wrote: >> Hey Guys, >> >> We just tired installing a MPC-3D-16XGE-SFPP on a MX960 running >> 10.0R2.10 on slot 0 and got a error "FPC 0 misconfigured". After this >> message, any attempt to "online" the FPC just fails with the same >> message again. The output of "show chassis fpc" shows the following; >> >> Temp CPU Utilization (%) Memory Utilization (%) >> Slot State (C) Total Interrupt DRAM (MB) Heap Buffer >> 0 Offline ---FPC misconfiguration--- >> 1 Online 28 12 0 1024 23 33 >> >> >> Anyone else encounter this problem before? This is occurring on 2 >> separate cards on different routers, so I don't think the cards are >> faulty. > > Is the other card in the chassis a trio card as well? You can't mix trio > and non-trio cards until 10.2, and you can't run the MPC/MIC cards until > 10.1. > > -- > Richard A Steenbergen <r...@e-gerbil.net> http://www.e-gerbil.net/ras > GPG Key ID: 0xF8B12CBC (7535 7F59 8204 ED1F CC1C 53AF 4C41 5ECA F8B1 2CBC) > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp