Hello list, last friday had a power failure, and after getting power back we had a non-working M7i box. Chassis alarms doesn't even light on.
Looking at console port there was FreeBSD boot saying something about "error 32 lba 0" and "error 16 lba 0", which took me to understand the disk (ad1, the 2.5" notebook-like one) went dead. After a few reboots, now it doesn't even recognize a hard disk being present. I wonder: if I place a CF disk on ad0 (at CF reader), and install JUNOS on it (copying from another M7i), will it work? Or am I required to have an working IDE HD ? Juniper's docs says if a CF is installed, HD is a secondary option. But just wanted to be sure before getting all this job done. Before you ask: getting this RE-400 back to Juniper to RMA is not an option at the moment (think about refurbished). If this message is out of AUP, just reply off-list. Thank you. Kind regards, Felipe _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp