On 22/06/10 18:13, Richard A Steenbergen wrote: > With a healthy dose of complex commit scripts you can get an MX commit > time up to 20 seconds in no time flat. Well at least you could, I > noticed they did something in 9.6 to make it a lot faster (at least for > me, with commit sync, etc). EX on the other hand can get to a 30 sec > config with half the number of commit scripts and a much smaller config. > Of course if you really want suffering try SRX, which takes 30 seconds > to commit a nearly blank config. :)
I had a J6350 last night take over 10 minutes to commit. Under heavy BGP load, and although it won't admit it I strongly believe heavy memory pressures (two full feeds, plus four other feeds totalling ~50k routes on a 1GB system in 10.0R2, RAM has been ordered and the second full feed turned off). -- Julien Goodwin Studio442 "Blue Sky Solutioneering"
signature.asc
Description: OpenPGP digital signature
_______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
