If you could give me a hint where to find it I would be really glad! Tom
Am 30.06.2010 12:43, schrieb Jared Mauch: > Have you disabled adaptive standby? I can look up the configuration in a few > if you don't have it. > > Sent from my iThing > > On Jun 30, 2010, at 5:46 AM, Thomas Eichhorn <t...@te3networks.de> wrote: > >> Thanks for all your help, >> I cannot simply remove the disk nor the cf card, >> the box is to far away. >> >> I now tried to remove the disk from the boot list, >> so it does not get initialized and the box completely runs >> from CF - If that doesn't work I will try the other way (disabling >> cf and enabling disk). >> >> If this works I will give feedback here so that people also >> running into that problem will find it. >> >> Tom >> >> Am 30.06.2010 10:51, schrieb Marcin Kucharczyk: >>> On Wednesday 30 of June 2010 10:10:24 Akhmedd Aly wrote: >>>> Hi Marcin, >>>> >>>> we have the same problems with M7Is in the may: >>>> *M7i> panic: ad_ioctl:1275539168: ad1: Standby not armed but state is in >>>> valid: state="ARMED"* >>>> >>>> And all of this problems come after installing (we never did not use >>>> internal CF in its before) Compact Flash 1GB (not from official Juniper >>>> upgrade kit), its also rebooted every 3-4 hours with the same PANIC >>>> message. >>>> >>>> After removing CFs we do not have this problems. So I think that it was not >>>> problems with internal disks... >>>> >>> >>> Hi, >>> >>> our router had rebooted every 4 hours and 21 minutes (exactly). As I wrote >>> to >>> Thomas we had removed HDD, and now router runs on CF only. Our CF isn't >>> from >>> official Juniper upgrade kit, it's regular Kingston Standard 4GB CF Type 1. >>> >>> It's a pity that CF and HDD can't run together. >>> >>> Regards, >>> Marcin >>> >>>> >>>> >>>> 2010/6/22 Marcin Kucharczyk <m.kucharc...@net.icm.edu.pl> >>>> >>>>> Hello, >>>>> >>>>> tonight one of ours M7i crashed with strange log entry: >>>>> >>>>> savecore: reboot after panic: ad_ioctl:1277186066: ad1: Standby not armed >>>>> but >>>>> state is invalid: state="ARMED" >>>>> >>>>> Disk was replaced 2 weeks ago. Yesterday we inserted new compact flash >>>>> card (there wasn't any before). We upgraded Junos to 10.0R3.10 also. Do >>>>> you have any idea what could happened? >>>>> >>>>> Regards, >>>>> Marcin Kucharczyk >>> _______________________________________________ >>> juniper-nsp mailing list juniper-nsp@puck.nether.net >>> https://puck.nether.net/mailman/listinfo/juniper-nsp >> >> _______________________________________________ >> juniper-nsp mailing list juniper-nsp@puck.nether.net >> https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp