Hi Mike, I haven't seen this issue before. I mostly look after a bunch of SSG5s, but I do have an SSG140 in production that was probably switched off for 3-4months before being used, no issues with it.
I did have an issue with a really old Netscreen 100 where the flash sort of died. It wouldn't let upgrade the OS to a newer version, maybe the larger image ran into some bad flash or something. I take it you're talking about ScreenOS and not the boot loader itself? I would make sure the boot loader is up to date. Michael. On 03/08/2010, at 4:47 AM, TCIS List Acct wrote: > Hi all, > > We've had a pair of SSG-140s as well as a few NS-50's seem to "self corrupt" > their flash/boot image over the last 12 months. These units are ones that > were in production previously, then were turned off for periods ranging from > a week to a few months. Upon powering them back on, they refuse to boot and > require the firmware to be re-loaded via TFTP, at which time they work fine > again. We've seen a few KB articles on flash corruption with SSG-550Ms, and > have opened up a JTAC case (which has gone nowhere). > > Has anyone else seen this behavior from Juniper/Netscreen firewalls? > > --Mike > > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp Michael Dale Dalegroup M 0422 770 473 E md...@dalegroup.net W http://www.dalegroup.net/ _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
