Is there any logical unit created under sp- interface? You seem to have defined only physical interface without any logical unit to go with under forwarding-output.
-----Original Message----- From: Andy M. [a...@ctdam.com] Received: 18/08/2010 12:40 To: Nathan Sipes [nathan.si...@gmail.com] CC: juniper-nsp@puck.nether.net [juniper-...@puck.nether.net] Subject: Re: [j-nsp] Flow accounting on an M7i I tried both layer-3 and layer-2-3 with no effect. I also manually took the PIC offline and brought it back up. -Andy On Aug 18, 2010, at 2:49 PM, Nathan Sipes wrote: > Did you set the services for the card under the chassis section.. > fpc 1 { > pic 2 { > adaptive-services { > service-package layer-3; > } > } > > On Wed, Aug 18, 2010 at 12:32 PM, Andy M. <a...@ctdam.com> wrote: > I do, I meant to include that. > > a...@er01> show ntp status > status=0644 leap_none, sync_ntp, 4 events, event_peer/strat_chg, > version="ntpd 4.2.0-a Fri Apr 25 07:34:52 UTC 2008 (1)", > processor="i386", system="JUNOS9.1R1.8", leap=00, stratum=2, > precision=-19, rootdelay=46.515, rootdispersion=14.961, peer=43788, > refid=204.152.184.72, > reftime=d016a4a1.c6f63e1b Wed, Aug 18 2010 13:27:45.777, poll=6, > clock=d016a4d5.07841ed1 Wed, Aug 18 2010 13:28:37.029, state=4, > offset=-0.073, frequency=62.639, jitter=2.050, stability=0.004 > > -Andy > > > On Aug 18, 2010, at 2:28 PM, Stefan Fouant wrote: > > -----Original Message----- > From: juniper-nsp-boun...@puck.nether.net [mailto:juniper-nsp- > boun...@puck.nether.net] On Behalf Of Andy M. > Sent: Wednesday, August 18, 2010 11:43 AM > To: juniper-nsp@puck.nether.net > Subject: [j-nsp] Flow accounting on an M7i > > I'm trying to enable flow accounting on one of our M7is. JunOS > version is 9.1R8. No matter what I do, I can't get a flow to export. > I'd appreciate any input to obvious errors, or tips on other things to > try. I've also tried removing sampling from the interface and doing > it with a firewall rule. > > When I enable it, for a few minutes nothing seems to happen. Then I > can see memory usage increase to the point there is no free memory on > the ASP, then it begins to give errors. It never tries to export the > flow: > > Do you have an active NTP time source and is it synchronized? > > Stefan Fouant, CISSP, JNCIEx2 > www.shortestpathfirst.net<http://www.shortestpathfirst.net> > GPG Key ID: 0xB5E3803D > > > > > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp