You disconnected the cables but didn't delete the chassis cluster config, is that right?
Delete the chassis cluster. Scott On Fri, Sep 17, 2010 at 11:04 AM, Fahad Khan <fahad.k...@gmail.com> wrote: > Hi Folks, > > I have been running SRX3600 In chassis cluster. > > At the moment, I have disconnected control link and fabric link and > Secondary device is isolated from the network. But on primary device, the > cluster configs are still there. The network is working fine with primary > device but when i see chassis cluster status, i find this > > SRX3600-A> show chassis cluster status > Cluster ID: 1 > Node Priority Status Preempt Manual failover > > Redundancy group: 0 , Failover count: 1 > node0 254 primary no no > node1 0 lost n/a n/a > > Redundancy group: 1 , Failover count: 1 > node0 0 primary yes no > node1 0 lost n/a n/a > > why I am getting Node0 priority as 0 for red group 1, while i has been set > to 254??? > > have any body experienced????? > > thanks and regards, > > > Muhammad Fahad Khan > JNCIP - M/T # 834 > IT Specialist > Global Technology Services, IBM > fa...@pk.ibm.com > +92-301-8247638 > Skype: fahad-ibm > http://pk.linkedin.com/in/muhammadfahadkhan > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp