Hello,
I'm configuring an ERX310 for PPPoE termination. >From the all DSLAM's we get about 190 tagged VLAN's. So for every VLAN i need to create a subinterface. Now we want to create multiple virtual-routers for customers who want to get an VPN. In the basic setup without VR's(only the default) i have a profile bounded to an subinterface. The profile config: profile Test ip unnumbered gigabitEthernet 1/1.102 ppp authentication virtual-router default pap Now I created a VR and a domain-map and mapped a domain to the VR But the PPPoE request is comming from the same subinterface as above specified (where i attached a profile to the subinterface) Problem is that I only can attach one profile to a subinterface. I want the following: - based on a domain attach the PPPoE session to a specific VR - PPPoE request can come from different subinterfaces Example: Customer 1 form subif 1 to VR-A Customer 2 from subif 1 to VR-B Customer 3 from subif 2 to VR-A Customer 4 from subif 2 to VR-B Kind regards, Tom _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp