AFAIK, you need different subinterfaces for each virtual-router. Eg.:
Vlan 10 - VR ABC Vlan 20 - VR DEF ... Rgs On 11/2/10, Tom Teeuwen <t...@tomteeuwen.eu> wrote: > Hello, > > > > I'm configuring an ERX310 for PPPoE termination. > > From the all DSLAM's we get about 190 tagged VLAN's. > > So for every VLAN i need to create a subinterface. > > > > Now we want to create multiple virtual-routers for customers who want to get > an VPN. > > In the basic setup without VR's(only the default) i have a profile bounded > to an subinterface. > > The profile config: > > profile Test > ip unnumbered gigabitEthernet 1/1.102 > ppp authentication virtual-router default pap > > > > Now I created a VR and a domain-map and mapped a domain to the VR > > But the PPPoE request is comming from the same subinterface as above > specified (where i attached a profile to the subinterface) > > Problem is that I only can attach one profile to a subinterface. > > I want the following: > > - based on a domain attach the PPPoE session to a specific VR > > - PPPoE request can come from different subinterfaces > > > > Example: > > Customer 1 form subif 1 to VR-A > > Customer 2 from subif 1 to VR-B > > Customer 3 from subif 2 to VR-A > > Customer 4 from subif 2 to VR-B > > > > Kind regards, > > Tom > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > -- Sent from my mobile device ./diogo -montagner _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp