Thank you very much... Yes - tried installing 3 times now just to see if my luck was that bad ;)
Paul -----Original Message----- From: dale.s...@gmail.com [mailto:dale.s...@gmail.com] On Behalf Of Dale Shaw Sent: January-10-11 4:14 PM To: Paul Stewart Cc: juniper-nsp Subject: Re: [j-nsp] EX4200 Problem - Bad Switch? Hi Paul, On Tue, Jan 11, 2011 at 7:53 AM, Paul Stewart <p...@paulstewart.org> wrote: > > Ran across a weird issue today on a new EX4200-48T switch. Switch boots up > and during so I see this (sorry for the length of the post): > [...] > > So I thought that perhaps the JunOS install is corrupt and rebooted with my > USB drive connected. Ran through the installation and it wont complete: > [...] > > Is this a bad switch?? Probably no worse than every other EX4200 out there :-) They're a bit sensitive and emotional. Looks like the file system is corrupted. Re-installing JUNOS should fix it but you've tried that. In some cases when this has happened to us, we've needed to attempt the re-install a couple of times. If you haven't already, try re-installing from the loader> prompt again. If/when you get it back online, open a JTAC case and ask for the 'automatic file system mirroring and recovery script'. Cheers, Dale _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp