Hi Martin, i have SDCFJ-2048 running on RE-2.0 and RE-5.0 since two years. I never tried the "Extreme" models and stuck to "Standard" speed CF instead, because of issue reports from others. Hope this helps.
good luck, Christian >-----Original Message----- >From: juniper-nsp-boun...@puck.nether.net >[mailto:juniper-nsp-boun...@puck.nether.net] On Behalf Of Martin T >Sent: Sunday, February 20, 2011 10:45 PM >To: Jonas Frey (Probe Networks) >Cc: juniper-nsp@puck.nether.net; pek...@netcore.fi >Subject: Re: [j-nsp] general guidelines for installing JUNOS >to RE, where HDD and CF are blank > >Pekka, >by "Extreme model" did you mean this one: http://mcaf.ee/7f49a ? > >Jonas, >did I understand correctly, that SDCFB-512-A10(http://mcaf.ee/9f345) >and SDCFB-1024-A10(http://mcaf.ee/b2d7a) are both tested and >suitable for JONOS installation from CF using "install image" >method? Any other CF cards, which are confirmed to work? > >regards, >martin > >2011/2/14 Martin T <m4rtn...@gmail.com>: >> Ok, so for example those two should work for sure: >> >SDCFB-512-A10(http://www.amazon.com/SanDisk-CompactFlash-SDCFB-512-A10 >> -Retail-Package/dp/B00006B9QF) and >> >SDCFB-1024-A10(http://www.amazon.com/SanDisk-SDCFB-1024-A10-Typ >e-Retail-Package/dp/B00006AE3K)? >> Any other CF cards, which are confirmed to work? The one I >tried(with >> no luck so far), 1GB "SiliconDrive CF"(SiliconSystems, Inc. >Now owned >> by Western Digital) SSD-C01G-3596, looks like this: >> http://img23.imageshack.us/img23/8923/jsdd.jpg >> >> >> regards, >> martin >> >> 2011/2/11 Jonas Frey (Probe Networks) <j...@probe-networks.de>: >>> Ohh...well there are so many models and partnumbers of >these i guess >>> its hard to test all of them. Maybe we should write down working >>> partnumbers on the cluepon wiki. The "blue" SanDisk ones >are atleast >>> the same as juniper used time ago. After that they switched >to simple >>> tech and probably others (atleast on T320/T640 RE-1600/RE-2000). >>> >>> >>> Am Freitag, den 11.02.2011, 12:14 +0200 schrieb Pekka Savola: >>>> On Fri, 11 Feb 2011, Jonas Frey (Probe Networks) wrote: >>>> > I doubt the PCMCIA Adapter is the problem. I guess its the >>>> > CF....maybe its too new. I know about serveral newer CF >cards not working in RE2/3. >>>> > Try to get a regular SanDisk 1GB+ CF. (not the >Ultra/Extreme models). >>>> > This should work. >>>> >>>> Thanks for providing the soapbox ;-). Extreme model worked for us >>>> on RE3.0 fine, except that its performance is too good. >Juniper RE >>>> CPU gets overloaded when writing an image on it and it drops BGP >>>> sessions etc. This is not a bug according to JTAC. Be aware if you >>>> ever need to do CF flashing on live equipment :P >>>> >>> >> > >_______________________________________________ >juniper-nsp mailing list juniper-nsp@puck.nether.net >https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp