Hello there,
Please show us:

show snmp mib walk jnxOperatingDescr | match engine

Regards
Alex

----- Original Message ----- From: "Maria Cecilia Cena" <mc...@ifxcorp.com>
To: <juniper-nsp@puck.nether.net>
Sent: Tuesday, March 15, 2011 5:35 PM
Subject: [j-nsp] jnxOperatingCPU problem


Hi,

Need to monitor RE1 and RE2 CPU usage via snmp using jnxOperatingCPU...but I donĀ“t know why from both REs I received the same value (from router cli, I can see that values are not identical between the two REs). Here you can see:

XXXXX> show snmp mib walk jnxOperatingCPU.9
jnxOperatingCPU.9.1.0.0 = 96
jnxOperatingCPU.9.1.1.0 = 0
jnxOperatingCPU.9.2.0.0 = 96
jnxOperatingCPU.9.2.1.0 = 0

{master}
XXXXX > show chassis routing-engine
Routing Engine status:
 Slot 0:
   Current state                  Master
   Election priority              Backup
   Temperature                 39 degrees C / 102 degrees F
   CPU temperature             39 degrees C / 102 degrees F
   DRAM                       640 MB
   Memory utilization          87 percent
   CPU utilization:
     User                      80 percent
     Background                 0 percent
     Kernel                    16 percent
     Interrupt                  4 percent
     Idle                       0 percent
   Model                          RE-2.0
   Serial ID                      08000008bc167501
   Start time                     2009-09-02 16:04:57 UTC
   Uptime                        558 days, 23 hours, 30 minutes, 25 seconds
   Load averages:                 1 minute   5 minute  15 minute
                                      1.06       0.84       0.50
Routing Engine status:
 Slot 1:
   Current state                  Backup
   Election priority              Master
   Temperature                 29 degrees C / 84 degrees F
   CPU temperature             29 degrees C / 84 degrees F
   DRAM                       768 MB
   Memory utilization          30 percent
   CPU utilization:
     User                       0 percent
     Background                 0 percent
     Kernel                     0 percent
     Interrupt                  0 percent
     Idle                      99 percent
   Model                          RE-2.0
   Serial ID                      8b000007346e7801
   Start time                     2010-10-04 09:50:37 UTC
   Uptime                        162 days, 5 hours, 44 minutes, 35 seconds

Do you have any idea about this? Could it be related with graceful-switchover configured for routing-engine redundancy?

Thanks for your help!

Regards, Cecilia






_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp

_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp

Reply via email to