Thanks for your email! Here is the output:
XXXXX> show snmp mib walk jnxOperatingDescr | match engine jnxOperatingDescr.9.1.0.0 = Routing Engine 0 jnxOperatingDescr.9.1.1.0 = Routing Engine 0 PCMCIA Card 0 jnxOperatingDescr.9.2.0.0 = Routing Engine 1 jnxOperatingDescr.9.2.1.0 = Routing Engine 1 PCMCIA Card 0 {master} Regards, Cecilia -----Mensaje original----- De: Alex [mailto:alex.arsen...@gmail.com] Enviado el: miércoles, 16 de marzo de 2011 10:01 Para: Maria Cecilia Cena; juniper-nsp@puck.nether.net Asunto: Re: [j-nsp] jnxOperatingCPU problem Hello there, Please show us: show snmp mib walk jnxOperatingDescr | match engine Regards Alex ----- Original Message ----- From: "Maria Cecilia Cena" <mc...@ifxcorp.com> To: <juniper-nsp@puck.nether.net> Sent: Tuesday, March 15, 2011 5:35 PM Subject: [j-nsp] jnxOperatingCPU problem Hi, Need to monitor RE1 and RE2 CPU usage via snmp using jnxOperatingCPU...but I don´t know why from both REs I received the same value (from router cli, I can see that values are not identical between the two REs). Here you can see: XXXXX> show snmp mib walk jnxOperatingCPU.9 jnxOperatingCPU.9.1.0.0 = 96 jnxOperatingCPU.9.1.1.0 = 0 jnxOperatingCPU.9.2.0.0 = 96 jnxOperatingCPU.9.2.1.0 = 0 {master} XXXXX > show chassis routing-engine Routing Engine status: Slot 0: Current state Master Election priority Backup Temperature 39 degrees C / 102 degrees F CPU temperature 39 degrees C / 102 degrees F DRAM 640 MB Memory utilization 87 percent CPU utilization: User 80 percent Background 0 percent Kernel 16 percent Interrupt 4 percent Idle 0 percent Model RE-2.0 Serial ID 08000008bc167501 Start time 2009-09-02 16:04:57 UTC Uptime 558 days, 23 hours, 30 minutes, 25 seconds Load averages: 1 minute 5 minute 15 minute 1.06 0.84 0.50 Routing Engine status: Slot 1: Current state Backup Election priority Master Temperature 29 degrees C / 84 degrees F CPU temperature 29 degrees C / 84 degrees F DRAM 768 MB Memory utilization 30 percent CPU utilization: User 0 percent Background 0 percent Kernel 0 percent Interrupt 0 percent Idle 99 percent Model RE-2.0 Serial ID 8b000007346e7801 Start time 2010-10-04 09:50:37 UTC Uptime 162 days, 5 hours, 44 minutes, 35 seconds Do you have any idea about this? Could it be related with graceful-switchover configured for routing-engine redundancy? Thanks for your help! Regards, Cecilia _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp