If vlan tags are to be removed in VPLS PW how to demultiplex b/w bridge domains in a virtual switch ?
Krasi On Tue, Mar 22, 2011 at 1:28 PM, <jbues...@jb-internetworking.com> wrote: > Hi there, > > I have the following issue: > > switch1--(ciscoPE)-----(MX80)----switch2 > ----switch3 > > Switch1 is connected to a Cisco PE > Switch2 and switch 2 are connected to a MX80 in the same bridge domain. > > The bridge-domain is configured in the virtual-switch and VPLS is > activated. > > Now the problem is, previously when I did not needed bridging for VPLS > (and this virtual-switches) I had enabled the command "vlan-id none" under > the VPLS routing-instance. > > This command ensures that packets send over the VPLS cloud have their > vlan-tag removed.This ensures interop with Cisco. > > Now with virtual switches this command is not supported. This means that > the switches behind the MX have connectiviy but not towards the switch > behind the Cisco PE. > > How can I resolve this issue? > > My config looks like: > > ge-1/0/0 { > native-vlan-id 500; > speed 100m; > mtu 1504; > unit 0 { > family bridge { > interface-mode trunk; > vlan-id-list 500; > } > } > } > ge-1/0/1 { > native-vlan-id 500; > speed 100m; > mtu 1504; > unit 0 { > family bridge { > interface-mode trunk; > vlan-id-list 500; > } > } > } > > vpls1 { > instance-type virtual-switch; > interface ge-1/0/0.0; > interface ge-1/0/1.0; > protocols { > vpls { > no-tunnel-services; > vpls-id 500; > mtu 1600; > neighbor 10.110.0.2; > } > } > bridge-domains { > vpls1 { > domain-type bridge; > vlan-id 500; > } > } > } > > > Thanks > > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp