Hi Keith... Sounds like really bad luck in my opinion.... our experiences have been pretty good overall. I'm not saying that "stuff doesn't break" but have never RMA'ed a card from an MX yet - not much Juniper period. In the past year or so, a couple of EX2200's and a fantray from an ERX-310 is all I've seen fail.
I'm sure some others have had other levels of luck and will share their experiences.... Cheers, Paul -----Original Message----- From: juniper-nsp-boun...@puck.nether.net [mailto:juniper-nsp-boun...@puck.nether.net] On Behalf Of Keith Sent: Wednesday, April 13, 2011 12:18 PM To: juniper-nsp@puck.nether.net Subject: [j-nsp] MX480 troubles. Hi. You folks have been great at answering some of my questions regarding our MX480, but have come across some big problems that me and the person who signed the PO are not very pleased about. A month or so ago I found we had a bad MPC card. Ok so we RMA'd it. This week I came on site to do some work on the MX. Long story short, new MPC card that had been installed and running for 15 days was flaky and possibly even the MIC too after I spent a day troubleshooting with Juniper TAC. So on a non production box, just sitting in the rack, powered up for a little more than 8 weeks, passing no traffic at all, it's on the 3rd MPC and 2nd MIC. I have to say at this point I am really not impressed with Juniper hardware. I'm sure the box is ok when its running properly, but at this point I'm having doubts about Juniper. We were pretty stoked about this box, now...not so much. Is this an anomaly and we got a lemon? Or have any others had to replace this many parts in so short of time? _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp