FWIW, I also experienced the same issue on an MX480 (with dual RE) that I have been evaluating.
Performed the same operation on the other MX480 we have without issue. Makes me think it's hardware -- perhaps storage related -- going south. On Tue, May 17, 2011 at 12:40 PM, Cyn D. <cynthia_...@yahoo.ca> wrote: > Thanks for all replied. It is a M120 with 9.5R1.8. It took about half hour > to copy a jinstall file between two REs. > ----- Original Message ----- From: "Phil Shafer" <p...@juniper.net> > To: "Cyn D." <cynthia_...@yahoo.ca> > Cc: <juniper-nsp@puck.nether.net> > Sent: Tuesday, May 17, 2011 3:51 PM > Subject: Re: [j-nsp] Copy files to RE > > >> "Cyn D." writes: >>> >>> I tried to copy(ftp) jinstall file to backup RE but for some reason the >>> Mgmt port on bac >>> kup RE is not responsive. Then tried to copy the file from master RE to >>> backup RE but it >>> takes for ever - more than half hour still not complete. Just wondering >>> what is the bes >>> t way to copy the big file in this situation? >> >> You can copy files between REs using "re0:xxx" and "re1:xxx" as src/dst: >> >> user@cli> file copy re0:/etc/motd /tmp/foo >> >> user@cli> file show /tmp/foo >> --- JUNOS 11.2I built 2011-01-18 19:57:42 UTC >> At least one package installed on this device has limited support. >> Run 'file show /etc/notices/unsupported.txt' for details. >> >> Thanks, >> Phil > > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp