Hello list, I'm looking at options on how to do all of the following: 1) Increase bandwidth capacity by adding multiple links with 'flow' based hashing 2) Sub-second detection mechanism of a indirect link failure that is distributed to hardware (i.e. PFE handles) 3) Above two must work with NSR and GRES + GR (NSR and GRES + GR and mutually exclusive, will only use one of the two)
So far here are the possible combinations I've come across (not sure if these are NSR and GRES + GR friendly): 1) LAG + BFD (this doesn't sound like a good idea b/c you have no grantee that hashing on each side will use the same link for BFD packets) 2) LAG + OAM (presume OAM will be for each physical interface and not entire the LAG) 3) ECMP + BFD 4) ECMP + OAM This setup is to run between MX960s w/ 10GE interfaces on MPC2s on Junos 10.4. Any pros/cons to going with either of these options? Any help is greatly appreciated, thanks! _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp